LawnBelt FAQ


F.A.Q: Installing this Irrigation System


Answers and solutions on how to install your Lawn Belt Irrigation kit.


5. I still have a few small leaks. Can water-proof caulking help? - Top


Would not suggest caulking...

See this checklist - usually because of centering over barb as explained below.

Make sure the converter fitting is in the UP and matches LawnBelt (the diamond shape should point downwards to match LawnBelt)

The clamp should be at the bottom of the collar halves.

Very important:

Push the Belt all the way past the barbs to the end of each fitting.

Center Belt ring over the barb for best seal.
(Ring is about 1/4" away from end of fitting)

Use a 5/16" wrench to tighten may help vs. a screwdriver. You may be able to tighten a bit more?

If you still have leaks after checking above items then contact customer service for a replacement part(s)

Call our customer service - perhaps they can ship to you with a special arrangement.

they are at (leave message if unavail)

Customer Service: 208-634-2333






- Updated: October 26, 2007


[Question Not Answered?]

Back to FAQ's