LawnBelt FAQ

F.A.Q: Irrigation System Design and Plotting

Find answers on how to properly design your Lawn Belt Irrigation System. Lots of tips and ways to speed up the irrigation design process.

26. I have 2 spigots now. 1 on the back and 1 on the side. Will this be enough? - Top

If watering a large yard you may need to add a couple more spigot locations in your yard so that you don't overextend LawnBelt (50-100 feet max extension to each Irrigation System Kit or zone). Also adding additional spigots will cut expense of having to purchase too much conduit. These additional spigots could be added with PVC or our Hide Hose Kit.

Have you visited our design page yet? - its at - there you will find a spray pattern template and gardenplot to both print and layout your design. For large yards use the Orbit Spray Pattern.

First locate your spigots on the gardenplot, then place the spray templates in your plan - next group the zones together then add the total distance of LawnBelt from your spigit to the end of each zone. If this distance is over 50 feet (the length of a kit) you will need to extend LawnBelt using a coupler kit avail in our store.

Example Layout

- Updated: May 6, 2005

[Question Not Answered?]

Back to FAQ's