LawnBelt FAQ


F.A.Q: Irrigation System Design and Plotting


Find answers on how to properly design your Lawn Belt Irrigation System. Lots of tips and ways to speed up the irrigation design process.


1. What happened to the T-Fitting - Top


We removed the T fitting because it requires additional Psi to power the system. Because of it people were missunderstanding its limitations. As you know LB is a 3 head system so be carefull when branching out from existing zone as Psi must be adequate.

If you want to create your own T you can do so - see link below. You will need a 1/2" T - like this one at Amazon http://www.amazon.com/1-2-Barb-Tee-Fitting/dp/B0009YD67Q

http://www.homegardentool.com/faq/3.44.htm

- Updated: March 8, 2006


[Question Not Answered?]

Back to FAQ's