PO Box 1169 McCall, ID 83638
(
208)634-2333


Congratulations for purchasing Lawn Belt Irrigation System. We are sure you will agree that Lawn Belt is the most innovative garden product on the market today!

Please read instruction thoroughly before installing this product.

Be sure to take readings from your garden spigot to test PSI and GPM.

1. Important Information
  • Do Not use any glues when installing Lawn Belt.
  • Do not use Lawn Belt as a drinking source. Lawn Belt is designed for outdoor garden irrigation only.
  • A backflow prevention valve may be required in your are. Call your water provider or check your local codes.
  • Do not Aerate or Thatch over area where Lawn Belt is installed.
2. Tools Required
  • Utility Knife
  • 5/16" box wrench or
    Flat Headed Screw Driver
  • Spade or Flat Shovel
  • Teflon Plumbers Tape



 

Do not use common shovel as you will find it difficult to cut a straight line for proper installation.

Additional Suggested Tools:

  • 3 foot foot hose connection
  • Pliers
3. Kit Contents

Familiarize yourself with the Sprinkler System

Before installation layout the Lawn Belt in the sun - by the time you get to the next step it will be more pliable and easier to work with.

Check contents of your kit with the list shown for each below:

Lawn Sprinkler Kit

  • 50 feet of Lawn Belt*
  • 3 adjustable radius full-circle sprinkler heads
  • 2 Full U-Fittings w/ auto drain
  • 1 End U-Fitting w/ auto drain
  • 6 collar kits ( 6 hose clamps & 12 collars halves)
  • 1 converter fitting
  • 1 90 deg elbow with crush-resistant brass fittings
  • 1 small clamp for elbow

Garden Border Kit

  • 50 feet of Lawn Belt*
  • 4 adjustable radius quarter-circle sprinkler heads
  • 3 Full U-Fittings w/ auto drain
  • 1 End U-Fitting w/ auto drain
  • 8 collar kits ( 8hose clamps & 16 collars halves)
  • 1 converter fitting
  • 1 90 deg elbow with crush-resistant brass fittings
  • 1 small clamp for elbow

over -->